{"title":"Gyokucho","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eGyokucho tools are known for their balance, sharpness, and ease of use, making them a favorite among woodworkers who want clean, accurate cuts with minimal effort. Our collection features a range of Gyokucho pull saws and accessories designed for fine joinery, detailed shaping, and smooth finish work. Each tool is crafted with attention to detail and performance in mind, giving you the control needed for everyday tasks and more advanced projects. Explore the complete selection to find the right saw or blade for your workflow.\u003c\/p\u003e","products":[{"product_id":"ryoba-handsaws","title":"Gyokucho Ryoba Saw","description":"\u003cp\u003eThe Gyokucho Ryoba Razorsaw puts a rip edge and a crosscut edge on one thin, flexible blade. Ryoba means \"both blades,\" and it is the traditional Japanese carpenter's answer to carrying two saws. It cuts on the pull stroke, so the blade stays in tension, the kerf stays narrow, and the cut tracks your line with far less effort than a Western push saw. The teeth are graduated for easy starts, the blade sits at an angle in the handle for reaching awkward cuts, and Gyokucho impulse-hardens each tooth so it stays sharp long after an ordinary saw fades.\u003c\/p\u003e\n\u003cp\u003eThe size you want depends on your work. The 210 and the fine-toothed 240 Komame are finish carpentry and furniture saws. The standard 240 is the general carpentry pick. The 270 is the all-rounder, and the 300 is the timber framer's choice, the one our students learn on. Every blade snaps out for a replacement in seconds, and replacement blades for each size are sold separately. The handle is sold on its own, and the saw comes apart for storage in a saw wrap.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Ryoba 210","offer_id":34422513860758,"sku":"605","price":43.99,"currency_code":"USD","in_stock":true},{"title":"Ryoba 240","offer_id":31590354583692,"sku":"610","price":48.99,"currency_code":"USD","in_stock":true},{"title":"Ryoba 240 Komame","offer_id":43632662937822,"sku":"611","price":48.99,"currency_code":"USD","in_stock":true},{"title":"Ryoba 270","offer_id":31590354616460,"sku":"615","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Ryoba 300","offer_id":31590354649228,"sku":"616","price":56.99,"currency_code":"USD","in_stock":true},{"title":"HANDLE ONLY","offer_id":40366489305238,"sku":"GY-115335","price":35.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/ryoba-japanese-handsaws-1998l.jpg?v=1793781500"},{"product_id":"ryoba-180-razorsaw","title":"Gyokucho Ryoba Saw No. 291, 180 mm","description":"\u003cp\u003eThe Gyokucho Ryoba No. 291 is a compact 180 mm Japanese ryoba: one blade with rip teeth on one edge and crosscut teeth on the other, sized for small tenons, laps and saddle joints.\u003c\/p\u003e\u003cp\u003eThe rip edge has progressive teeth and the crosscut edge is a fine 16.9 TPI. The 0.5 mm blade has no back, so it cuts to any depth, and at 390 mm overall it fits in a toolbox. It works like a small tenon saw that cuts on the pull. The S-291 replacement blade is sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":42833397743838,"sku":"291","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-ryoba-saw-no-291-180-mm-web-01.jpg?v=1794879508"},{"product_id":"gyokucho-flush-cutting-saw-double-edge","title":"Gyokucho Flush Cutting Saw Double Edge","description":"\u003cp\u003eThe Gyokucho No. 1151 is a double-edged Japanese flush cut saw for trimming plugs, dowels, pegs and through tenons level with the surface.\u003c\/p\u003e\u003cp\u003eThe 125 mm blade has no set and flexes, so it lies flat on the work and trims without scratching; light pressure from one finger keeps it flat. One edge has finer teeth for hardwood, the other coarser teeth for softwood. The teeth are impulse hardened, the beech handle is riveted to the blade, and at 10-1\/2 in overall it fits in a toolbox.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":37317122326678,"sku":"1151","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-flush-cutting-saw-double-edge-078.jpg?v=1793946487"},{"product_id":"saw-gyo-crosscut-270mm-razorsaw-13tpi","title":"Gyokucho Super Hard Crosscut Kataba Saw, 270 mm","description":"\u003cp\u003eThe Gyokucho Super Hard 270 is a 270 mm Japanese kataba crosscut saw for carpentry: plywood, rough-sawn lumber and laminated board, and stock 2 in and thicker.\u003c\/p\u003e\u003cp\u003eWith no back it cuts to any depth. The 0.6 mm blade carries impulse-hardened teeth at a 1.7 mm pitch, and electroless nickel plating resists rust and resin. Choose a traditional rattan-wrapped handle or a TPE grip; the replacement blade, sold separately, fits either.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Saw Rattan Handle","offer_id":43874638233822,"sku":"450","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Saw TPE Handle","offer_id":47454980440286,"sku":"453","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-super-hard-crosscut-kataba-saw-270-mm-web-01.jpg?v=1794879508"},{"product_id":"saw-gyo-kobiki-330mm","title":"Gyokucho Kobiki Timber Saw, 330 mm","description":"\u003cp\u003eThe Gyokucho Kobiki is a 330 mm Japanese forestry saw for green wood. Gyokucho calls it the top of its forestry line, made for live wood only, and it suits pruning in general and thick branches in particular.\u003c\/p\u003e\u003cp\u003eThe 1.0 mm blade is SK steel with electroless nickel plating against rust. The teeth are finer near the handle and grow larger toward the tip, from a 3.5 mm to a 4.5 mm pitch, so the cut starts easily and then moves fast. It has a wood handle and a wooden sheath with a leather strap. The S-721 replacement blade is sold separately.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":43874663563486,"sku":"721","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-kobiki-330mm-265.jpg?v=1793946486"},{"product_id":"saw-gyo-crosscut-razor-xfine-25tpi","title":"Gyokucho Dovetail Saw No. 297, 180 mm","description":"\u003cp\u003eThe Gyokucho No. 297 is a 180 mm dozuki, a Japanese back saw with a 0.3 mm blade and fine 25 TPI teeth, built for dovetails and small joinery.\u003c\/p\u003e\u003cp\u003eA full-length metal back holds the thin blade straight to the tip, so it tracks a knife line through dovetails and tenon shoulders. It is at its best on dovetails in boards up to about 1\/2 in thick, and it handles dry bamboo too. This is the basic dozuki we recommend for fine joinery. The S-297 replacement blade is sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":39674256720022,"sku":"297","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-dovetail-saw-no-297-180-mm-web-01.jpg?v=1794879507"},{"product_id":"saw-gyo-fine-crosscut-240-mm","title":"Gyokucho Proton Power Saw Edome No. 405","description":"\u003cp\u003eThe Gyokucho Proton Power Saw Edome No. 405 is a 240 mm Japanese crosscut pull saw for general carpentry, with a traditional rattan-wrapped handle. Edome is the crosscut tooth pattern.\u003c\/p\u003e\u003cp\u003eThe 0.6 mm blade is thick, tough and easy to handle, with impulse-hardened teeth at 15 TPI. It cuts general lumber, laminated wood, composite panels, MDF, particle board and plywood. A thumbscrew holds the blade, so it changes quickly, and the S-405 replacement blade is sold separately.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":44338581176542,"sku":"405","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-proton-power-saw-edome-405-1204605386.jpg?v=1762986493"},{"product_id":"saw-gyo-crosscut-razor-255mm","title":"Gyokucho Kataba Saw No. 105, 255 mm","description":"\u003cp\u003eThe Gyokucho Kataba No. 105 is a 255 mm Japanese pull saw with fine 22 TPI crosscut teeth, made for clean crosscuts in hardwoods like oak, maple, teak and exotics.\u003c\/p\u003e\u003cp\u003eA kataba has teeth on one edge and no back, so it cuts to any depth. The thin 0.020 in blade keeps the kerf narrow and the effort low, the teeth are impulse hardened for long wear, and the handle is wrapped in bamboo. When the teeth finally dull, the S-105 replacement blade, sold separately, snaps in.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":39674257014934,"sku":"105","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-kataba-saw-no-105-255-mm-web-01.jpg?v=1794879508"},{"product_id":"saw-gyo-dozuki-240-ex-fine-crosscut-370","title":"Gyokucho Dozuki Noko Saw, 240 mm","description":"\u003cp\u003eThe Gyokucho Dozuki Noko 240 is a fine crosscut dozuki, a Japanese back saw with a 240 mm, 0.3 mm blade and 25 TPI teeth for precise joinery, furniture and instrument work.\u003c\/p\u003e\u003cp\u003eThe blade is so thin it needs the metal back to stay straight. Its hijirime teeth alternate in height, which leaves a clean cut with little sawdust, and the blade is nickel plated. It rewards a light touch.\u003c\/p\u003e\u003cp\u003eTwo blade depths: the small cuts up to 2 in deep and the large up to 2-1\/2 in, each with a wood or TPE handle. Replacement blades for both are sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Small Wood Handle","offer_id":43633514119390,"sku":"370","price":68.99,"currency_code":"USD","in_stock":true},{"title":"Small TPE Handle","offer_id":44258417901790,"sku":"373","price":68.99,"currency_code":"USD","in_stock":true},{"title":"Large Wood Handle","offer_id":43633514152158,"sku":"371","price":68.99,"currency_code":"USD","in_stock":true},{"title":"Large TPE Handle","offer_id":47454974836958,"sku":"374","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-razorsaw-dozuki-noko-240mm-1204605397.jpg?v=1762992007"},{"product_id":"saw-gyo-back-ripcut-240mm","title":"Gyokucho Razorsaw A Crosscut Dozuki Saw","description":"\u003cp\u003eThe Gyokucho Razorsaw A is a Japanese dozuki, a crosscut back saw with a 0.3 mm blade held straight by a full metal back, for trim, joinery and fine carpentry. We carry it in 240 and 270 mm.\u003c\/p\u003e\u003cp\u003eThe teeth are filed for crosscutting and impulse hardened. They are a little larger than on Gyokucho's finer dozuki saws, so it moves well through wood, plywood, MDF and OSB, and the thin plate cuts a 0.5 mm kerf.\u003c\/p\u003e\u003cp\u003eThe 240 mm is the everyday size and comes with a traditional rattan-wrapped handle or an EVA grip. The 270 mm, with rattan, adds length for wider stock. Replacement blades for both are sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"240 mm Saw with Rattan Grip","offer_id":41029075206294,"sku":"300","price":41.99,"currency_code":"USD","in_stock":true},{"title":"240 mm Saw with Eva Grip","offer_id":41029065113750,"sku":"301","price":41.99,"currency_code":"USD","in_stock":true},{"title":"270 mm Saw with Rattan Grip","offer_id":43633707221214,"sku":"200","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saw-240-mm-saw-with-rattan-grip-dozuki-cross-cut-razorsawa-a-1204605403.jpg?v=1762994882"},{"product_id":"saw-gyo-back-panel-crosscut-240mm","title":"Gyokucho ZA Panel Saw, 240 mm","description":"\u003cp\u003eThe Gyokucho ZA 240 is a 240 mm Japanese craft saw with a very thin 0.3 mm blade held straight by a full metal back, for carpentry, joinery, furniture, instrument making and wood and bamboo crafts. The thin blade cuts sharply and leaves a surface that needs no planing.\u003c\/p\u003e\u003cp\u003eThe ZA type has teeth that run around the curved tip, so it can start a cut in the middle of a panel. The teeth are at a 1.5 mm pitch (16.9 TPI). Choose a traditional rattan-wrapped handle or a TPE grip; the S-306 replacement blade, sold separately, fits either.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Saw with Rattan Handle","offer_id":39674257211542,"sku":"306","price":41.99,"currency_code":"USD","in_stock":true},{"title":"Saw with EvaGrip Handle","offer_id":41029378637974,"sku":"307","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saw-saw-with-rattan-handle-razarsaw-panel-saw-za-240mm-1204605409.jpg?v=1762992121"},{"product_id":"saw-gyo-crosscut-180mm","title":"Gyokucho Atsuba Panel Saw, 180 mm","description":"\u003cp\u003eThe Gyokucho Atsuba No. 293 is a 180 mm Japanese kataba pull saw for crosscutting boards, sheet goods and small parts. Its rounded tip starts a cut in the middle of a panel, with no drilled hole needed.\u003c\/p\u003e\u003cp\u003eAtsuba means thick blade. At 0.5 mm the plate is stiffer than Gyokucho's thin dozuki saws, and with no back it cuts to any depth. The crosscut teeth are impulse hardened and the blade is nickel plated. At 400 mm overall it fits in a toolbox, and we think of it as a small panel saw. The S-293 replacement blade is sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":39674257375382,"sku":"293","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-atsuba-panel-saw-180-mm-web-01.jpg?v=1794879507"},{"product_id":"blade-gyo-180mm","title":"Gyokucho Komame Dovetail Saw, 180 mm","description":"\u003cp\u003eThe Gyokucho Komame 180 is a fine-tooth dozuki: a 180 mm Japanese back saw with a 0.3 mm blade and 26 TPI teeth for dovetails and small, precise joinery.\u003c\/p\u003e\u003cp\u003eKomame means small teeth. A long metal back keeps the blade straight, the kerf is just 0.46 mm, and the teeth are hardened to 68 to 71 HRC. It cuts hardwood, panel stock and plastic, up to 1-7\/8 in deep. The replacement blade is sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":43261637951710,"sku":"292","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-saw-gyokucho-komame-dovetail-razorsaw-180-1204605415.jpg?v=1762994887"},{"product_id":"blade-gyo-ryoba-blue-hard-210","title":"Gyokucho Blue Hard Ryoba Saw","description":"\u003cp\u003eThe Gyokucho Blue Hard is a Japanese ryoba, a double-edged pull saw with rip teeth on one edge and crosscut on the other, set up for careful work in hardwoods. We carry it in 210, 240 and 270 mm.\u003c\/p\u003e\u003cp\u003eThe Blue Hard's tooth line sits at a slightly shallower angle than a standard Gyokucho ryoba, so it cuts less aggressively, and the plate is heat treated a little stiffer. The teeth are impulse hardened to RC68 or more and the blade is nickel plated. It handles softwoods and temperate hardwoods well, and exotics with a light touch.\u003c\/p\u003e\u003cp\u003ePick the size for the work: the 210 for small joinery and trim, the 240 for general bench work, and the 270 for bigger stock, with the coarsest teeth of the three. Replacement blades for each size are sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"210 Saw","offer_id":41986555117790,"sku":"649","price":38.99,"currency_code":"USD","in_stock":true},{"title":"240 Saw","offer_id":41986621735134,"sku":"650","price":48.99,"currency_code":"USD","in_stock":true},{"title":"270 Saw","offer_id":41986658762974,"sku":"GY-655","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-ryoba-blue-hard-1204605465.jpg?v=1762986126"},{"product_id":"saw-gyo-komame-exf-180","title":"Gyokucho Jushi Dovetail Saw, 180 mm","description":"\u003cp\u003eThe Gyokucho Jushi (No. 295) is a compact 180 mm Japanese dozuki made for plastics and hardwoods. Jushi means resin: Gyokucho built it for PVC, acrylic and decorative laminate, and it also cuts hard woods such as ebony and rosewood, along with general lumber, laminated wood and thin plywood.\u003c\/p\u003e\u003cp\u003eThe 0.3 mm blade has impulse-hardened teeth at a 1.5 mm pitch (16.9 TPI) that cut with and across the grain, in a shape made to resist chipping. The spine keeps the thin blade straight through dovetails and tenon shoulders. It has a TPE grip and is 15-1\/2 in overall, so it fits in most toolboxes. The S-295 replacement blade is sold separately.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":39674258227350,"sku":"295","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-180-jushi-dovetail-saw-gyokucho-jushi-dovetail-saw-180-1204605467.jpg?v=1762986140"},{"product_id":"gyokucho-crosscut-razorsaw-240mm","title":"Gyokucho Crosscut Kataba Saw No. 410, 240 mm","description":"\u003cp\u003eWhen every cut is across the grain, a dedicated crosscut saw beats a compromise, and the Gyokucho Kataba Razorsaw No. 410 is that saw. The 240 mm blade carries fine crosscut teeth at about 16 TPI that Gyokucho impulse-hardens with a flash of electric current, keeping them sharp far beyond an ordinary saw's life.\u003c\/p\u003e\n\u003cp\u003eIt is a kataba, a single-edged saw with no back, so it cuts to any depth, and the 0.6 mm blade is stiff enough for long cuts in 2x stock while the 0.9 mm kerf stays narrow. It cuts on the pull stroke for accuracy right on your knife line, the handle is traditional rattan-wrapped, and when the blade eventually dulls you snap in an S-410 replacement, sold separately, rather than losing the saw.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":41028989747350,"sku":"410","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-saw-gyokucho-crosscut-razorsaw-410-1204605420.png?v=1773853386"},{"product_id":"razorsaw-tatebiki-noko","title":"Gyokucho Tatebiki Rip Dozuki Saw No. 303, 240 mm","description":"\u003cp\u003eThe Gyokucho Tatebiki Noko No. 303 is a 240 mm rip dozuki, a Japanese back saw with rip teeth for tenon cheeks, dovetails and other cuts along the grain.\u003c\/p\u003e\u003cp\u003eTatebiki means rip cut. The 0.3 mm blade has a metal back, cuts a 0.52 mm kerf and reaches 45 mm (1-3\/4 in) deep. The rip teeth also crosscut fairly well, so it covers most joinery in softwoods and hardwoods, plus plywood, MDF and laminates. Each tooth is impulse hardened and the blade is nickel plated. Let the saw's weight do the work. The S-303 replacement blade is sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":41029116297366,"sku":"303","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-saw-with-rattan-handle-tatebiki-noko-rip-cut-razorsaw-303-1204605424.jpg?v=1763004017"},{"product_id":"rip-cutting-razorsaw-dozuki","title":"Gyokucho Tatebiki Rip Dozuki Saw No. 372, 240 mm","description":"\u003cp\u003eThe Gyokucho No. 372 is a 240 mm professional rip dozuki, a Japanese back saw with rip teeth for tenon cheeks, dovetails and other cuts along the grain.\u003c\/p\u003e\u003cp\u003eIts deep 55 mm blade gives about 50 mm (2 in) of practical cut. The 0.3 mm blade carries rip teeth at 19.5 TPI, each impulse hardened to RC68 or more, and the blade is nickel plated against rust and sap. It works well in softwoods and temperate hardwoods, and in exotics with a light touch. Use it with a guide block for square tenon cheeks. The S-372 replacement blade is sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":41986851307742,"sku":"372","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-saw-rip-cutting-razorsaw-dozuki-tatebiki-noko-dozuki-372-1204605428.jpg?v=1762983961"},{"product_id":"gyokucho-panel-cutting-saw-180","title":"Gyokucho Usuba Panel Saw, 180 mm","description":"\u003cp\u003eThe Gyokucho Usuba No. 290 is a 180 mm Japanese pull saw with a 0.3 mm blade for fine crosscuts in wood, plywood and bamboo. Its curved tip starts a cut in the middle of a flat panel without a drilled hole.\u003c\/p\u003e\u003cp\u003eUsuba means thin blade. A metal back stiffens most of the plate and leaves the tip free for starting cuts, and the thin plate leaves a narrow 0.51 mm kerf. It is a good small saw for trim, cabinet parts and craft work. The replacement blade is sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":42823757955294,"sku":"290","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-usuba-panel-saw-180-mm-web-01.jpg?v=1794879508"},{"product_id":"gyokucho-fine-crosscut-razorsaw-240mm","title":"Gyokucho Proton Power Saw Ibarame No. 400","description":"\u003cp\u003eThe Gyokucho Proton Power Saw Ibarame No. 400 is a 240 mm Japanese kataba crosscut saw for sizing timber and sheet goods and for square or angled cuts in larger joinery.\u003c\/p\u003e\u003cp\u003eWith no back it cuts to any depth, and the 0.6 mm blade is stiff enough for long cuts in thick stock. Each tooth is impulse hardened to RC68 or more at the surface while the root stays soft to resist breaking, and the blade is nickel plated against rust and sap. It leaves a smooth surface with very little breakout on the exit side. The S-400 replacement blade is sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":44505071976670,"sku":"400","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-saws-gyokucho-proton-power-saw-ibarame-no-400-1204605431.jpg?v=1763008454"},{"product_id":"gyokucho-super-genryu-pole-saw","title":"Gyokucho Super Kenryu Pole Saw","description":"\u003cp\u003eThe Gyokucho Super Kenryu is a lightweight telescoping pole saw for pruning green wood, fruit trees and ornamental branches you can't reach from the ground. We carry two lengths, 1.9 m and 3.4 m.\u003c\/p\u003e\u003cp\u003eThe aluminum pole has a double-locking extension that keeps the sections secure at height, and the handle has a rubber grip. Both blades are 1.1 mm thick with a 4 mm tooth pitch, with impulse-hardened set teeth in a hijirime pattern and nickel plating against sap and rust. The 1.9 m saw carries a 240 mm blade and reaches 6 ft 1 in; the 3.4 m carries a 300 mm blade and reaches 11 ft 3 in. Replacement blades for both are sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"1.9 M (75-in)","offer_id":45367300161758,"sku":"GY-783","price":65.99,"currency_code":"USD","in_stock":true},{"title":"3.4 M (134-in)","offer_id":45367302160606,"sku":"GY-782","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-saw-gyokucho-super-genryu-pole-saw-1204605468.jpg?v=1763007137"},{"product_id":"fugaku-folding-saw","title":"Gyokucho Fugaku Folding Saw, 240 mm","description":"\u003cp\u003eThe Gyokucho Fugaku is a folding Japanese pull saw with a 240 mm blade and a quartersawn beech handle, made in three versions for joinery and general cutting.\u003c\/p\u003e\u003cp\u003eThe blade locks open with a sprung lever, folds into the handle with the teeth covered, and is replaceable.\u003c\/p\u003e\u003cp\u003eChoose by the cut. The Super Hard dozuki is a 0.3 mm crosscut back saw with a rounded rip-tooth tip for starting cuts mid-panel. The Universal dozuki has 0.3 mm teeth that rip and crosscut, good for dovetails. The Super Hard kataba has a stiffer 0.6 mm backless blade for deep cuts in hardwood, sheet goods and thicker timber. All three come as a set, and replacement blades for each are sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Dozuki Super Hard","offer_id":47377561878750,"sku":"GYO-110","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Dozuki Universal","offer_id":47377561911518,"sku":"GYO-111","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Kataba Super Hard","offer_id":47377561944286,"sku":"GYO-112","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Set of Three: Dozuki Super Hard - Dozuki Universal - Kataba Super Hard","offer_id":47377684037854,"sku":null,"price":95.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/c5375cdc-032f-4901-80d3-4e12427c82c9.png?v=1776993547"},{"product_id":"woodslim-pro-150","title":"Gyokucho WoodSlim Pro Pruning Saw, 150 mm","description":"\u003cp\u003eThe Gyokucho WoodSlim Pro is a compact 150 mm Japanese pruning saw for garden work in tight spaces. The short blade tapers to a slim tip that reaches into dense growth and makes clean cuts where a bigger saw can't maneuver.\u003c\/p\u003e\u003cp\u003eThe Pro has a thin 0.5 mm blade with impulse-hardened teeth at a 2.5 mm pitch (10.2 TPI). It has a small wood handle and comes in a wooden sheath with a belt loop. The R691 replacement blade is sold separately.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":47461814829278,"sku":"6911","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/2e4dc823-5f83-4595-8432-52722f3c9838.png?v=1776993492"},{"product_id":"razorsaw-kariwaku-300-eva-grip","title":"Gyokucho Kariwaku 300 Framing Saw","description":"\u003cp\u003eThe Gyokucho Kariwaku 300 is a 300 mm Japanese pull saw built for formwork and rough carpentry. Kariwaku means formwork, and Gyokucho lists it for form plywood, OSB, general lumber, laminated wood and logs. It also suits timber framing and general construction.\u003c\/p\u003e\u003cp\u003eThe 0.8 mm blade has large teeth at a 3.0 mm pitch (8.5 TPI), impulse hardened so they stay sharp, with a nickel coating against rust. The EVA grip is light, soft and non-slip, and long enough for two hands. The S-501 replacement blade is sold separately.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":47461815484638,"sku":"501","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/1d7af92b-99c4-4273-8962-e909ca892346.png?v=1776993492"},{"product_id":"plant-hunter","title":"Gyokucho Plant Hunter Mini Folding Saw, 100 mm","description":"\u003cp\u003eThe Gyokucho Plant Hunter Mini is a small folding Japanese pruning saw with a 100 mm (3.9 in) blade, for light pruning, thinning, cuttings and grafting where hand pruners won't reach or won't cut.\u003c\/p\u003e\u003cp\u003eThe 0.6 mm blade cuts on the pull stroke with fine komame crosscut teeth at a 1.5 mm pitch, leaving a smooth cut on live wood. It also handles green woodworking and bushcraft. A spring lock holds the blade open, the handle is unfinished cherry, and it folds to about 5 in for a pocket. The replacement blade is sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":47461816139998,"sku":"TS163","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-plant-hunter-mini-folding-saw-100-mm-091.jpg?v=1794526626"},{"product_id":"stainless-steel-sankaku-hoe-with-aluminum-handle","title":"Japanese Stainless Steel Sankaku Hoe with Aluminum Handle","description":"\u003cp\u003eThe Doukan Hori Jiro is a long-handled Japanese sankaku (triangle) hoe with a stainless steel blade and an aluminum handle. Each part of the blade does a different job: the wavy edge turns soil, the serrated edge gathers cut weeds, the straight edge levels a bed and the pointed tip digs seed furrows.\u003c\/p\u003e\u003cp\u003eThe oval aluminum handle is light and long enough to work without bending over, and the stainless blade resists rust and cleans up easily. It's 1490 mm (58-5\/8 in) overall with a blade 240 mm long and 130 mm wide (about 9-1\/2 x 5-1\/8 in), and it weighs about 1.9 lb.\u003c\/p\u003e\u003cp\u003eDoukan has made shears and garden tools in Miki, Hyogo, since 1966.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":47461816762590,"sku":"DK807","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/d8c99e3a-256d-43c7-b41c-ff71d6c5e0e6.jpg?v=1776963184"},{"product_id":"stainless-steel-weeding-sickle-pink-handle","title":"Gyokucho Stainless Crack Weeding Sickle DK-695","description":"\u003cp dir=\"ltr\"\u003eThis Japanese crack weeder goes where most garden tools can’t: the narrow joints between pavers, brick and flagstone. The thin stainless blade turns 90 degrees off the shank and tapers to a point, so it drops into a joint and drags along it. The serrated inner edge catches grass, moss and roots as you pull back, and the pointed tip picks out whatever the teeth miss.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eIt’s made in Miki, Japan’s historic toolmaking city, under the Isojiro name. Stainless steel stands up to wet soil and moss, and the lacquered wood handle has a hang hole so it can live on a hook by the door. Better than a butter knife, and made for the job.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"125 mm","offer_id":47674993639646,"sku":"DK695","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/StainlessSteelWeedingSicklePinkHandle3_1_1.jpg?v=1792205886"},{"product_id":"rakunandesu-anvil-pruning-shears","title":"Gyokucho Rakunandesu Anvil Pruning Shears","description":"\u003cp\u003eThe Gyokucho Rakunandesu are Japanese anvil pruning shears for dry, dead and woody stems up to 15 mm (about 5\/8 in) thick, designed by Gyokucho and five years in development.\u003c\/p\u003e\u003cp\u003eOn an anvil pruner one sharp blade closes onto a flat anvil, which suits hard, dry wood. The blade is SK5 carbon steel, impulse hardened to hold its edge, and the anvil is glass-reinforced nylon. The cast aluminum body has an over-molded TPE grip, a 3-position spring tension adjuster and a selector that sets the opening to half or full, to suit your hand and the job. Both the blade and the anvil are replaceable. A blade and anvil set and the anvil on its own are sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":47461838127326,"sku":"TS179","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/place-holder-image-1080x1080_29f06a9e-ba77-4f1b-8317-b12e75de7ad0.jpg?v=1786607531"},{"product_id":"hori-hori-garden-digging-tool","title":"Gyokucho Hori Hori Digging Knife","description":"\u003cp\u003eThe Gyokucho Hori Hori, the Gardener's Little Friend, is a Japanese digging knife for rooting out deep weeds and planting bulbs and bedding plants.\u003c\/p\u003e\u003cp\u003eThe 6-1\/2 in blade is high carbon tool steel, tempered for heavy use. Its front is shaped like a small shovel for digging, one edge has saw teeth that cut through tough roots and small branches, and the back is beveled so it's easy to sharpen. The red beech handle is riveted to the blade, it's 11-1\/2 in overall, and it comes with a scabbard with a belt loop.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":47636742471902,"sku":"BU001","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/469ce882-93bb-466f-aecc-0158845d4cae.jpg?v=1776963283"},{"product_id":"stainless-steel-sickle-pink-handle","title":"Gyokucho Stainless Weeding Sickle DK-696","description":"\u003cp dir=\"ltr\"\u003eWhere the \u003ca href=\"https:\/\/www.sheltertools.com\/products\/stainless-steel-weeding-sickle-pink-handle?_pos=6\u0026amp;_sid=7087f6ef1\u0026amp;_ss=r\u0026amp;variant=47674993639646\" target=\"_blank\" rel=\"noopener\"\u003ecrack weeder\u003c\/a\u003e picks at joints, this one cuts. The Isojiro DK-696 is a compact Japanese weeding sickle with a gently curved 4-7\/8-in stainless blade and a fine serrated edge. Draw it toward you along the ground and the curve follows the soil, taking weeds off at the root while the teeth grip stems instead of sliding past them.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe blade is stainless and hardened through, so wet grass and a night left outside don’t bother it. At 12-5\/8 in overall, the handle gives a little extra reach into beds and borders, and the bright pink is hard to lose in the grass. A hang hole lets it live on a hook. Made by Doukan in Miki, Japan.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":47675028439262,"sku":"DK696","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/StainlessSteelSicklePinkhandle_1.jpg?v=1792205766"},{"product_id":"replacement-blades-for-fugaku-pole-saw","title":"Gyokucho Fugaku Pole Saw Replacement Blades","description":"\u003cp\u003eThese replacement blades fit the Fugaku FLP36-P5.0 pole saw, the three-section telescoping pruning saw that extends to 16.4 ft (5 m). The saw carries an upper saw blade and a lower cutting blade, and both can be replaced.\u003c\/p\u003e\u003cp\u003eThe upper blade (F788) is the main saw blade: 360 mm (14-1\/4 in) long and curved, 1.8 mm thick and taper ground, with extra-large teeth at a 4.0 mm pitch (6.3 TPI). The teeth are impulse hardened and the blade is nickel plated against rust. The lower blade is F780.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Upper Blade","offer_id":47931093942494,"sku":"F788","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Lower Blade","offer_id":47931093975262,"sku":"F780","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-fugaku-pole-saw-replacement-blades-web-01.jpg?v=1794879507"},{"product_id":"pole-saw","title":"Gyokucho Fugaku Pole Saw, 5 m","description":"\u003cp\u003eThe Gyokucho Fugaku FLP36-P5.0 is a telescoping pole saw that reaches 5 m (16.4 ft) for pruning high branches, with a 360 mm curved Japanese pull-saw blade.\u003c\/p\u003e\u003cp\u003eThree sections extend from 2.3 m (7.5 ft) closed to 3.6 m with one section out and 5 m fully extended. The taper-ground blade is 1.8 mm thick with a 4 mm tooth pitch for fast cuts in green wood, and hard chrome plating resists rust and sap. Hooks on the blade pull down loose branches and keep the saw from slipping off the limb. Replacement blades are sold separately.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":48186424361182,"sku":"F7887","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/3fc71fc0-2ab9-4304-bbb6-c2bac0d345dd.jpg?v=1777656256"},{"product_id":"gyokucho-tatebiki-rip-dozuki-saw-no-303-replacement-blade-240-mm","title":"Gyokucho Tatebiki Rip Dozuki Saw No. 303 Replacement Blade, 240 mm","description":"\u003cp\u003eThe S-303 is the replacement blade for the Gyokucho Tatebiki No. 303, a 240 mm rip dozuki for tenon cheeks, dovetails and other cuts along the grain.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.3 mm thick and nickel plated, with a metal back, rip teeth at a 1.5 mm pitch (16.9 TPI), a 0.52 mm kerf and 45 mm (1-3\/4 in) of cutting depth. The teeth are impulse hardened, so they stay sharp a long time but aren't meant to be filed. When they dull, fit a new blade and keep your rattan handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49437827072222,"sku":"S-303","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-saw-blade-tatebiki-noko-rip-cut-razorsaw-303-1204605421.jpg?v=1763004124"},{"product_id":"gyokucho-tatebiki-rip-dozuki-saw-no-372-replacement-blade-240-mm","title":"Gyokucho Tatebiki Rip Dozuki Saw No. 372 Replacement Blade, 240 mm","description":"\u003cp\u003eThe S-372 is the replacement blade for the Gyokucho Tatebiki No. 372, a 240 mm professional rip dozuki for tenon cheeks, dovetails and other cuts along the grain.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.3 mm thick and nickel plated, with a metal back, rip teeth at a 1.3 mm pitch (19.5 TPI) hardened to RC68 or more, a 0.51 mm kerf and a deep 55 mm blade that gives about 50 mm (2 in) of practical cut. Impulse-hardened teeth stay sharp a long time but aren't meant to be filed. When they dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49437861576926,"sku":"S-372","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-replacement-saw-blade-tatebiki-noko-dozuki-372-1204605425.jpg?v=1762983963"},{"product_id":"gyokucho-dovetail-saw-no-297-replacement-blade-180-mm","title":"Gyokucho Dovetail Saw No. 297 Replacement Blade, 180 mm","description":"\u003cp\u003eThe S-297 is the replacement blade for the Gyokucho No. 297, a 180 mm dozuki built for dovetails and small joinery.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.3 mm thick with a full-length metal back, fine teeth at a 1.0 mm pitch (25.4 TPI), a 0.46 mm kerf and a blade depth of 37 to 45 mm (1.5 to 1.8 in). The teeth are impulse hardened, so they stay sharp a long time but aren't meant to be filed. When they dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49437861642462,"sku":"S-297","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-dovetail-saw-no-297-replacement-blade-180-mm-web-01.jpg?v=1794879507"},{"product_id":"gyokucho-komame-dovetail-saw-replacement-blade-180-mm","title":"Gyokucho Komame Dovetail Saw Replacement Blade, 180 mm","description":"\u003cp\u003eThis is the replacement blade for the Gyokucho Komame 180, a fine-tooth dozuki for dovetails and small, precise joinery.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 180 mm long and 0.3 mm thick with a long metal back, 26 TPI teeth hardened to 68 to 71 HRC, a 0.46 mm kerf and up to 1-7\/8 in (48 mm) of cutting depth. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49437861707998,"sku":"S-292","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saws-replacement-blade-gyokucho-komame-dovetail-razorsaw-180-1204605412.jpg?v=1762986122"},{"product_id":"gyokucho-jushi-dovetail-saw-replacement-blade-180-mm","title":"Gyokucho Jushi Dovetail Saw Replacement Blade, 180 mm","description":"\u003cp\u003eThe S-295 is the replacement blade for the Gyokucho Jushi (No. 295), a compact 180 mm dozuki made for plastics and hardwoods.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.3 mm thick with impulse-hardened teeth at a 1.5 mm pitch (16.9 TPI) that cut with and across the grain, and a kerf of about 0.52 mm. It cuts PVC, acrylic and decorative laminate, hard woods such as ebony and rosewood, and general lumber, laminated wood and thin plywood. Impulse-hardened teeth aren't meant to be filed, so when they dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49437862559966,"sku":"S-295","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-jushi-dovetail-saw-replacement-blade-180-mm-web-01.jpg?v=1794879507"},{"product_id":"gyokucho-dozuki-noko-saw-replacement-blade-240-mm-small","title":"Gyokucho Dozuki Noko Saw Replacement Blade, 240 mm, Small","description":"\u003cp\u003eThe small replacement blade for the Gyokucho Dozuki Noko 240, a fine crosscut dozuki for precise joinery, furniture and instrument work. It fits the small saw, with either the wood or TPE handle, and cuts up to 2 in deep.\u003c\/p\u003e\u003cp\u003eLike the blade on the saw, it's 240 mm long and 0.3 mm thick, nickel plated, with a metal back and hijirime crosscut teeth at a 1.0 mm pitch (25.4 TPI). Hijirime teeth alternate in height, which leaves a clean cut with little sawdust. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49437862756574,"sku":"S-370","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-dozuki-noko-saw-replacement-blade-240-mm-small-web-01.jpg?v=1794879507"},{"product_id":"gyokucho-dozuki-noko-saw-replacement-blade-240-mm-large","title":"Gyokucho Dozuki Noko Saw Replacement Blade, 240 mm, Large","description":"\u003cp\u003eThe large replacement blade for the Gyokucho Dozuki Noko 240, a fine crosscut dozuki for precise joinery, furniture and instrument work. It fits the large saw, with either the wood or TPE handle, and cuts up to 2-1\/2 in deep.\u003c\/p\u003e\u003cp\u003eLike the blade on the saw, it's 240 mm long and 0.3 mm thick, nickel plated, with a metal back and hijirime crosscut teeth at a 1.0 mm pitch (25.4 TPI). Hijirime teeth alternate in height, which leaves a clean cut with little sawdust. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49437862789342,"sku":"S-371","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-dozuki-noko-saw-replacement-blade-240-mm-large-web-01.jpg?v=1794879507"},{"product_id":"gyokucho-atsuba-panel-saw-replacement-blade-180-mm","title":"Gyokucho Atsuba Panel Saw Replacement Blade, 180 mm","description":"\u003cp\u003eThe S-293 is the replacement blade for the Gyokucho Atsuba No. 293, a 180 mm kataba pull saw for crosscutting boards, sheet goods and small parts.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.5 mm thick and nickel plated, with crosscut teeth at a 1.5 mm pitch (16.9 TPI) and a rounded tip with unset teeth that starts a cut in the middle of a panel. The teeth are impulse hardened, so they stay sharp a long time but aren't meant to be filed. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438283464926,"sku":"S-293","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-atsuba-panel-saw-replacement-blade-180-mm-web-01.jpg?v=1794879507"},{"product_id":"gyokucho-blue-hard-ryoba-saw-replacement-blade-210-mm","title":"Gyokucho Blue Hard Ryoba Saw Replacement Blade, 210 mm","description":"\u003cp\u003eThe S-649 is the replacement blade for the 210 mm Gyokucho Blue Hard, a double-edged ryoba pull saw with rip teeth on one edge and crosscut on the other, set up for careful work in hardwoods.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.45 mm thick and nickel plated, with progressive rip teeth from 6.9 to 10.2 TPI and crosscut teeth at 16.9 TPI, impulse hardened to RC68 or more. The 210 is the size for small joinery and trim. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438283497694,"sku":"S-649","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-blue-hard-ryoba-saw-replacement-blade-210-mm-web-01.jpg?v=1794799805"},{"product_id":"gyokucho-blue-hard-ryoba-saw-replacement-blade-240-mm","title":"Gyokucho Blue Hard Ryoba Saw Replacement Blade, 240 mm","description":"\u003cp\u003eThe S-650 is the replacement blade for the 240 mm Gyokucho Blue Hard, a double-edged ryoba pull saw with rip teeth on one edge and crosscut on the other, set up for careful work in hardwoods.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.5 mm thick and nickel plated, with progressive rip teeth from 6.7 to 10.6 TPI and crosscut teeth at 14.9 TPI, impulse hardened to RC68 or more. The 240 is the size for general bench work. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438283530462,"sku":"S-650","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-blue-hard-ryoba-saw-replacement-blade-240-mm-web-01.jpg?v=1794799806"},{"product_id":"gyokucho-blue-hard-ryoba-saw-replacement-blade-270-mm","title":"Gyokucho Blue Hard Ryoba Saw Replacement Blade, 270 mm","description":"\u003cp\u003eThe S-655 is the replacement blade for the 270 mm Gyokucho Blue Hard, a double-edged ryoba pull saw with rip teeth on one edge and crosscut on the other, set up for careful work in hardwoods.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.6 mm thick and nickel plated, with progressive rip teeth from 4.5 to 6.7 TPI and crosscut teeth at 10.2 TPI, impulse hardened to RC68 or more. The 270 has the coarsest teeth of the three, for bigger stock. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438283563230,"sku":"S-655","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-blue-hard-ryoba-saw-replacement-blade-270-mm-web-01.jpg?v=1794799805"},{"product_id":"gyokucho-fugaku-folding-saw-replacement-blade-240-mm-dozuki-super-hard","title":"Gyokucho Fugaku Folding Saw Replacement Blade, 240 mm, Dozuki Super Hard","description":"\u003cp\u003eThis is the replacement blade for the Gyokucho Fugaku Dozuki Super Hard (No. 110), the 240 mm folding crosscut back saw in the Fugaku line.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.3 mm thick, with crosscut teeth at a 1.5 mm pitch (16.9 TPI) and a rounded rip-tooth tip for starting cuts in the middle of a panel. When the teeth dull, fit a new blade and keep your beech handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438283628766,"sku":"GYO-S-110","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/56f1544f-dc6f-426c-9a0b-ce76ec062ed6.png?v=1776993608"},{"product_id":"gyokucho-fugaku-folding-saw-replacement-blade-240-mm-dozuki-universal","title":"Gyokucho Fugaku Folding Saw Replacement Blade, 240 mm, Dozuki Universal","description":"\u003cp\u003eThis is the replacement blade for the Gyokucho Fugaku Dozuki Universal (No. 111), the 240 mm folding back saw in the Fugaku line with teeth that rip and crosscut.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.3 mm thick, with universal teeth at a 1.5 mm pitch (16.9 TPI) that rip and crosscut, and a 0.52 mm kerf. It's a good blade for dovetails. When the teeth dull, fit a new blade and keep your beech handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438284644574,"sku":"GYO-S-111","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/b54bf728-a7c0-4de2-b392-e40e6ea5d090.png?v=1776993608"},{"product_id":"gyokucho-fugaku-folding-saw-replacement-blade-240-mm-kataba-super-hard","title":"Gyokucho Fugaku Folding Saw Replacement Blade, 240 mm, Kataba Super Hard","description":"\u003cp\u003eThis is the replacement blade for the Gyokucho Fugaku Kataba Super Hard (No. 112), the 240 mm folding kataba in the Fugaku line.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: a stiffer 0.6 mm backless blade with crosscut teeth at a 1.9 mm pitch (13.4 TPI), for deep cuts in hardwood, sheet goods and thicker timber. When the teeth dull, fit a new blade and keep your beech handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438284677342,"sku":"GYO-S-112","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/2aa617cc-52d2-425c-af83-315c8dd3c0f8.png?v=1776993608"},{"product_id":"gyokucho-kariwaku-300-framing-saw-replacement-blade","title":"Gyokucho Kariwaku 300 Framing Saw Replacement Blade","description":"\u003cp\u003eThe S-501 is the replacement blade for the Gyokucho Kariwaku 300 (No. 501), a 300 mm pull saw for formwork, rough carpentry and timber framing.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.8 mm thick and nickel coated, with large teeth at a 3.0 mm pitch (8.5 TPI) and a kerf of about 1.12 mm. It cuts form plywood, OSB, general lumber, laminated wood and logs. The teeth are impulse hardened, so they stay sharp a long time but aren't meant to be filed. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438284710110,"sku":"S501","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/81c3de23-e7b4-4846-b4ee-8e8b2c891b43.png?v=1776993492"},{"product_id":"gyokucho-plant-hunter-mini-folding-saw-replacement-blade-100-mm","title":"Gyokucho Plant Hunter Mini Folding Saw Replacement Blade, 100 mm","description":"\u003cp\u003eThis is the replacement blade for the Gyokucho Plant Hunter Mini, the small folding pruning saw with a 100 mm (3.9 in) blade and a cherry handle.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.6 mm thick with fine komame crosscut teeth at a 1.5 mm pitch, cutting on the pull stroke with a 0.9 mm kerf and leaving a smooth cut on live wood. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438284775646,"sku":"TS164","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-plant-hunter-mini-folding-saw-100-mm-093.jpg?v=1794526626"},{"product_id":"gyokucho-super-hard-crosscut-kataba-saw-replacement-blade-270-mm","title":"Gyokucho Super Hard Crosscut Kataba Saw Replacement Blade, 270 mm","description":"\u003cp\u003eThe S-450 is the replacement blade for the Gyokucho Super Hard 270, a 270 mm kataba crosscut saw for carpentry: plywood, rough-sawn lumber, laminated board and stock 2 in and thicker.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.6 mm thick with electroless nickel plating, and impulse-hardened crosscut teeth at a 1.7 mm pitch (14.9 TPI). With no back, it cuts to any depth, and it fits either handle, rattan or TPE. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438284808414,"sku":"S-450","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/products\/gyokucho-saw-replacement-blade-super-hard-cross-cut-razorsaw-270mm-13tpi-1204605447.jpg?v=1762991896"},{"product_id":"gyokucho-usuba-panel-saw-replacement-blade-180-mm","title":"Gyokucho Usuba Panel Saw Replacement Blade, 180 mm","description":"\u003cp\u003eThe S-290 is the replacement blade for the Gyokucho Usuba No. 290, a 180 mm pull saw for fine crosscuts in wood, plywood and bamboo.\u003c\/p\u003e\u003cp\u003eIt has the same specs as the blade on the saw: 0.3 mm thick with crosscut teeth at a 1.5 mm pitch (16.9 TPI), a 0.51 mm kerf, and a curved tip that starts a cut in the middle of a flat panel. A metal back stiffens about three quarters of the length. When the teeth dull, fit a new blade and keep your handle.\u003c\/p\u003e\u003cp\u003eGyokucho saws are made in Miki, Hyogo, by Razorsaw Kogyo, which was set up in 1969 when it developed the replaceable-blade saw. Gyokucho Sangyo, its sales company since 1975, sells them.\u003c\/p\u003e","brand":"Gyokucho","offers":[{"title":"Default Title","offer_id":49438285594846,"sku":"S-290","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/files\/gyokucho-usuba-panel-saw-replacement-blade-180-mm-web-01.jpg?v=1794879508"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/1838\/8808\/collections\/Gyokucho_short.jpg?v=1773852732","url":"https:\/\/www.sheltertools.com\/en-ca\/collections\/gyokucho.oembed?page=4","provider":"Shelter Institute","version":"1.0","type":"link"}