A PEA Boys Axe with a forged tool steel single blade and sturdy hickory handle is displayed on a white background.

A close-up of the PEA Boys Axe with a hickory handle is shown on a light wood surface; in front of the blade is its black leather sheath with snap button, removed for display.

A close-up of the PEA Boys Axe with a hickory handle rests on a light wood surface. Its forged tool steel blade is exposed, and a black leather sheath with snap button is nearby. The handle features the product label.

A close-up of a PEA Boys Axe with a forged tool steel blade and stitched leather sheath with metal snap button, resting on light wood. The hickory handle displays the product label.

A PEA Boys Axe with a hickory handle rests on a light wood floor. Its forged tool steel blade is protected by a dark brown leather sheath featuring white stitching and a strap.

A PEA Boys Axe with a hickory handle and forged tool steel head, protected by a black blade cover, rests on a light wooden floor.

2.25 lb. Dayton axe head outfitted with a 28″ curved hickory handle. Popularly referred to as a “boy’s” axe. A “mid” sized tool. Dayton pattern originated from the Dayton, Ohio, area.

Forged tool steel head. Made in USA.
Hand sharpened, tapered bit for cutting and light splitting.
ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition.
Head coated with boiled Linseed Oil over the as forged finish.
28″ curved American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. Hafted high and proud.
Axe head is hydraulically seated onto handle and secured with a traditional double wedge system.
The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/4″ of overall length of the handle is removed during assembly.

Boys Axe

Peavey

From $89.99 ~~$0.00~~ /

Only 6 in stock

Available for pickup

In stock at 873 US-1, Woolwich, ME 04579 · Usually ready in 24 hours

In stock at 873 US-1, Woolwich, ME 04579

Boys Axe

Available for pickup

873 US-1, Woolwich, ME 04579

Usually ready in 24 hours

873 U.S. 1
Woolwich ME 04579
United States

+12074427938

2.25 lb. Dayton axe head outfitted with a 28″ curved hickory handle. Popularly referred to as a “boy’s” axe. A “mid” sized tool. Dayton pattern originated from the Dayton, Ohio, area.

Forged tool steel head. Made in USA.
Hand sharpened, tapered bit for cutting and light splitting.
ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and we target 1-1/4 inches from the cutting edge. The poll and eye walls are not hardened and remain in the as forged condition.
Head coated with boiled Linseed Oil over the as forged finish.
28″ curved American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening. Hafted high and proud.
Axe head is hydraulically seated onto handle and secured with a traditional double wedge system.
The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/4″ of overall length of the handle is removed during assembly.