The key to fast, consistent honing is repeatability, and the Veritas MKII delivers it in spades. This deluxe set is the complete system: the standard MKII guide, the narrow-blade head for chisels and irons under 1/2 in, the skew registration jig for skewed blades, and the camber roller for putting a gentle curve on plane irons.
Whether you are a sharpening veteran or just starting, the guide controls the angle so you can concentrate on the edge. Set it once, and every stroke lands exactly where the last one did.
Specifications:
- Includes: standard clamping head, narrow-blade clamping head, angle registration jig, straight roller base, camber roller base
- Standard head: flat, tapered, and skew blades 1/2 to 2-7/8 in wide, up to 15/32 in thick; bevels 15 to 54 degrees, back bevels 10 to 20 degrees
- Narrow head: blades 1/8 to 1-1/2 in wide, bevel-edged to 15/32 in thick, square-edged to 11/32 in thick, self-centering canted jaws; bevels 15 to 40 degrees, back bevels 10 to 20 degrees
- Rollers: 2-in wide straight roller, barrel-shaped camber roller; single-thumbscrew swap; eccentric axle adds a micro-bevel at any setting
- Made in: Canada by Veritas (Lee Valley)
