Tormek Knife Jig

$45.99 USD - $94.99 USD /
Subscription -

Tormek's three knife jigs: the KJ-45, the wide KJ-140 and the SVM-00 for small knives.

Best For

  • Household and chef's knives
  • Long, flexible knives
  • Small pocket and paring blades

Select an option to add this to your cart.

Available for pickup
In stock at 873 US-1, Woolwich, ME 04579 · Usually ready in 24 hours

In stock at 873 US-1, Woolwich, ME 04579

Tormek Knife Jig

Available for pickup

873 US-1, Woolwich, ME 04579

Usually ready in 24 hours

873 U.S. 1
Woolwich ME 04579
United States

+12074427938

These are Tormek's knife jigs, in three versions: the SVM-00 Small Knife Holder, the KJ-45 Centering Knife Jig and the KJ-140 Wide Centering Knife Jig.

The KJ-45 is the everyday knife jig, for household, chef's, craft, hunting and fishing knives. The knife centers itself in the jig whatever its thickness or shape, so you get the same angle on both sides. It takes blades up to 10 mm thick, down to 60 mm (2-3/8 in) long and 12 mm (1/2 in) tall, and has an extra stop for tall knives like cleavers.

The KJ-140 works the same way with a wider 140 mm (5-1/2 in) clamp, for steady support on long, flexible blades like fillet knives. The SVM-00 holds the knife by its handle for blades too small for the KJ-45, like craft, chip carving and pocket knives, and is used along with it.

Engineer Torgny Jansson founded Tormek in 1973 to build a modern version of the old Swedish water-cooled grindstone. The name is short for Torgny's Mekaniska, and the very first model was driven by an electric hand drill. Tormek is based in Lindesberg, Sweden, where all of its product development, engineering and production still take place.

  • Options: Small Knife Holder SVM-00; Centering Knife Jig KJ-45; Wide Centering Knife Jig KJ-140
  • KJ-45: blades up to 10 mm thick, at least 60 mm long and 12 mm tall; self-centering
  • KJ-140: 140 mm (5-1/2 in) clamp, blades up to 10 mm thick; long, flexible knives
  • SVM-00: holds small knives by the handle; used with the KJ-45
  • Material: precision-cast zinc, composite
  • Fits: Tormek T-8, T-4 and older models
  • Made in: Sweden by Tormek

Customer Reviews

You may also like

A man wearing a blue cap and t-shirt leans over a large wooden beam inside a workshop, carving an end notch with a chisel.

Workbench Advice

Not sure which chisel to start with? Wondering how to keep your tools sharp? We've put together some resources to help you choose, use, and care for every tool we sell.